Part Number Hot Search : 
478M00 TS393ID KEMET AN8090S 003930 AM1013TR 3040C 2SC388
Product Description
Full Text Search
 

To Download MNU14-187DFI Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  scotchlok terminals mnu18-187dfi, MNU14-187DFI female disconnect, nylon fully insulated, butted seam data sheet specifications wire size: see table above barrel seam: butted insulator max. volt rating: 600 v building wire 1000 v signs or fixtures (luminaires) maximum operating temp: 221?f (105?c) maximum current: same as wire insulator material: nylon terminal material: brass plating: tin underwriters laboratories standard no. ul 486a 3m file no. e23438 canadian standards association standard no. 22.2 no. 0.65 3m file no. lr22190 installation information ul listed and csa certified for use on stranded cop- per (awg) wire only. strip away the end 3/8 inch of wire insulation. make the crimp in the proper station of a recommended 3m crimp tool: th-440, th-450 (scissor style), or tr-490 (ratchet style) hand tools. l d suitable for factory installation on steel or brass tabs. ul and csa. suitable for field application on brass tabs, strain relief is required. ul only. barrel crimp (electrical) warning turn power off before installing or removing terminal. all electrical work should be done according to appropriate electrical codes. w w t c u d o r p r e b m u n e r i w e g n a r ) g w a ( h t i w s e t a m b a t e l a m ) w ( h t d i w s s e n k c i h t xlwd l e r r a b h t g n e l l e r r a b . d . i m u m i x a m n o i t a l u s n i r e t e m a i d i f d 7 8 1 - 8 1 u n m8 1 - 2 20 2 0 . 0 x 7 8 1 . 01 8 . 00 3 . 03 2 . 05 2 . 05 8 0 . 05 4 1 . 0 i f d 7 8 1 - 4 1 u n m4 1 - 6 10 2 0 . 0 x 7 8 1 . 01 8 . 00 3 . 03 2 . 05 2 . 05 8 0 . 05 4 1 . 0
electrical products division 6801 river place blvd. austin, tx 78726-9000 http://www.3m.com/elpd litho in usa. 3m 2002 78-8126-0412-8-a important notice before using this product, you must evaluate it and determine if it is suitable for your intended application. you assume all ri sks and liability associated with such use. warranty; limited remedy; limited liability. this product will be free from defects in material and manufacture as of the date of purchase. 3m makes no other warranties including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose. if this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3ms option, to replace or repair the 3m product or refund the purchase price of the 3m prod uct. except where prohibited by law, 3m will not be liable for any loss or damage arising from this 3m product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. engineering specification crimp-type female disconnects shall, electrically and mechanically, connect permanently to the prestripped end of a stranded copper wire: and have a tongue portion with fingers which grip a male quick slide in a separable, reusable manner, forming a quick connect wiring termination. the connector line shall offer a tongue variations (sized to grip male tabs: 0.250? x 0.032? or 0.187? x 0.020? per ansi/nema cd-2) and barrel variations in wire (awg) size (22-18, 167-14, 12-10) and construction (non-insulated, vinyl insulated, nylon fully, etc.). the female disconnects shall have regulatory agency coverage (ul listing, csa certification). the tongue portion shall be marked with the wire range and manufacturers symbol ( ). the nylon fully insulated 0.187? female disconnect shall be tin plated 0.016? thick brass, with a tongue for gripping a 0.187? x 0.020? male tab, per ansi/nema cd-2 and a 0.25? long barrel covered by a molded nylon funnel entry sleeve, which extends to cover the tongue, color coded and sized for a specified (awg) wire range (red, 22-18: blue, 16-14). insulated connectors shall be ul listed and csa certified for 600 v building wire; 1000v signs or fixtures (luminaires); and temperature rated 221? (105?) maximum. female disconnects shall be suitable for field or factory wiring, with a ul recognized strain relief required. 3m and scotchlok are trademarks of 3m. is a trademark of underwriters laboratories. is a trademark of canadian standards association.


▲Up To Search▲   

 
Price & Availability of MNU14-187DFI

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X